When your kitchen faucet decides to go “kaput,” it can be difficult to know what to do.
Should you call in a repair person, or should you try to fix it yourself? Should you just run out and buy a new faucet?
The possibilities are seemingly endless and knowing what to do on how to replace kitchen faucet can be difficult. However, don’t panic. The first step is to determine if your kitchen faucet does actually need replacing. And, if it does, then you want to look into your how to replace kitchen faucet options.
How to Replace A Kitchen Faucet
<iframe width="560" height="315" src="https://www.youtube.com/embed/XqF5UhOW8fY" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>
Replacement Warning Signs
One of the first major indicators that it’s time for an entirely new faucet, instead of just some simple repairs, is if your faucet is rusting.
Many people think rust is just an aesthetic issue and, at first, it is. However, a faucet that is prone to rust is not a well-made quality faucet. And, once the outside components start to rust, the inside components will soon follow.
To prevent even more issues in the future, it’s in your best interest to just go ahead and buy and install a new, better quality faucet.
Leaking Water at the Handle Base
Leaks are always a bad sign with faucets, but this is especially true if the leak is coming from the handle base. This signifies a definite problem with the faucet itself and not with other components.
Sometimes, you might get lucky by replacing your cartridge. If that doesn’t fix the leak, you could try replacing the O-rings or even the screws, clips, and valves, in that order.
If none of that works, or if you simply don’t want to go through the trouble, then go ahead and replace your whole faucet. Chances are that you’re going to have to anyway. Often, when one thing goes and you start making repairs, that just means, unfortunately, that more problems are in store.
Your Water Pressure Drastically Decreases
No one likes poor water pressure. It can make it nearly impossible to thoroughly wash a dish.
If this happens to you, it could be because you have mineral deposits built up inside your faucet, often from years of use.
You can attempt to fix the issue by taking the faucet apart and cleaning it thoroughly. If you don’t want to do that, though, or if the problem persists, it’s probably time to go ahead and replace your faucet.
Honestly, in most cases, faucets don’t really need cleaning. Thus, by the time that they start to get so dirty and built-up with grime that they require a scrub, you’re really just helping them last a little longer by cleaning them.
If all that hassle isn’t worth it to you for something you’ll likely have to replace sooner rather than later, then just go ahead and get a replacement.
Your Faucet Is Outdated
There doesn’t always have to be something that is necessarily “wrong” with your faucet in order for you to change it.
Sometimes, you may just want a change, especially if your faucet is feeling a bit old and outdated.
Faucets that have an “opposite direction” that is standard in your area, meaning you get hot water with a particular turn whereas most other faucets would deliver cold water with that same turn, are easily replaced.
You can also replace faucets that don’t have the modern look you like or that simply don’t go with your home decor.
Faucets are quite affordable for most people, so there really is no shame in replacing one just because you’re “over” the way it looks. Plus, if a faucet is old enough to look dated, there’s a good chance that it wasn’t going to last you much longer anyway.
Your Faucet Has Become Squeaky
When you turn a faucet on or off, it shouldn’t squeak or make any kind of noise. In fact, the only sound that you should hear is the sound of running water pouring out of your faucet.
If squeaking does occur when operating your faucet, it’s probably because of faulty stem threads. You can fix this issue by taking off the handle and coating those threads with plumber’s oil.
Of course, you can also choose to fix the problem by replacing your faucet entirely. When you do that, you have a lot less to worry about, and you get a new faucet too, which is why this route is worth considering. Plus, as is the case with most faucet problems, squeakiness is usually a sign of bigger problems to come, so you may be better off by just springing for a replacement before you truly need one.
When It’s Time to Replace Your Faucet…
If, based on these signs or just on your own good judgment, you feel that it’s time to replace your faucet, don’t panic.
You have many options for how to replace the kitchen faucet. We’ll walk you through those choices to ensure your faucet gets replaced correctly.
Strategies for Replacing Your Kitchen Faucet
Call in the Professionals for Help
If you’re searching for the easiest way for how to replace kitchen faucet, calling on professionals is your very best choice.
When you call a professional plumber or another contractor, you’ll have the peace of mind that the job is done correctly and fully.
Plus, you don’t have to worry about having the right tools, following instructions carefully, or anything else. Sure, you might have to pay a bit more than you like, but, if it gets the job done right, it’s worth it.
That’s our best advice, but, if you do insist on doing it yourself, we’ve got some other ideas too.
Remove the Old Faucet and Then Call for Help
Many people would like the help of professionals to install a new faucet but just aren’t able to pay the huge amount that these people ask for.
If that’s you, don’t worry. You can easily offset some of the cost by choosing to do some of the work yourself. In fact, if you do the hardest part- removing the faucet – yourself, you can get rid of a lot of the labor fees.
To remove the old faucet, you have to get down on your hands and knees and uninstall it bit by bit. It’s not fun and it’s not easy. However, it’s also the most labor-intensive part of installing a new faucet and the most time-consuming. Thus, if you take care of it yourself, you can save a lot of money when it comes time to pay the professionals you hire.
Suck it Up and Follow the Instructions
If you are deadset on “doing it yourself,” then there’s probably no stopping you.
However, we can make the process a bit easier. Obviously, you should start by taking out the instructions that came with your faucet.
Don’t do anything- even a single step- until you have read through those carefully. The last thing you want is, in the middle of the process, to find that you’re missing a tool or you don’t understand a step.
Once you are sure you understand what you’re doing and you have all of the exact tools you will need in front of you, only then should you set to work. Make sure you have turned all of the water off too. Doing so will prevent floods and other accidents from occurring.
Once you’re done installing your new faucet, give it a try. If it works, great! when it doesn’t, go back through each instructional step trying to find the issue. Unfortunately, still can’t fix it after one or two tries, call in a professional to avoid doing any further damage.
Enjoy and Care for Your New Faucet
No matter how you ultimately get your faucet installed, take good care of it. After all, you want it to last you for as long as possible.
Store your warranty, if your faucet came with one, in a secure place, just in case you need it. Also, clean your faucets regularly and follow any care instructions that came with it.
If you run into problems at any point, don’t hesitate to call a plumber.
Remember, the better you take care of your faucet. The longer it will last you and the longer it will work, so proper care is a must.